Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable – proven in over 50,000,000 launches!

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable – proven in over 50,000,000 launches!

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable -proven in over 50,000,000 launches!

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable – proven in over 50,000,000 launches!

Thunder Tiger introduces the PHOENIX BX, and raises the benchmark of buggy performance once again. Built on a high-tech moulded composite chassis, the PHOENIX BX is strong, rigid and lighter in overall weight than other buggies. The PHOENIX BX features race-proven transmission with a beefy 2.40:1 ratio for effortless power handling. New suspension technology developed by Thunder Tiger has also been applied to the PHOENIX BX, with extra long suspension arms for great stability and improved rough-track handling. The front end’s geometry has been optimized with re-designed steering blocks for improved Ackerman and 30 degree caster blocks. The new front-end design results in increased rigidity, and in less front end free-play.

NOW INCLUDES 2.4GHz RADIO SYSTEM

Key Features:

• Top spec race buggy in a ready to run package.
• Quality ACE R/C Jaguar 2CH radio system
• ACE R/C VELOCI -R forward/reverse electronic speed control
• Super Sports 17T motor-
• Full bronze bushings throughout
• Racing ball differential
• Oil-filled moulded composite shocks
• Completely countersunk, moulded chassis
• Adjustable camber, squat, wheelbase, and shock position
• Factory printed and trimmed body
• Adjustable servo saver assembly
• Quadra-symmetric suspension for greater stability and handling.
• Optimized front end geometry improves steering and increases rigidity
• Race-winning transmission for effortless power handling.
• Adjustable slipper clutch assembly
• 48T Spur gears accept after market pinion gears
• Adjustable battery placement
• Stub axles and dog bones  

Specifications:

•  Wheelbase: 267mm
•  Weight: 1510g
•  Length: 373mm
•  Width: 238mm
•  Height: 120mm
•  Ground Clearance: 34mm

 Versions Available:

• TT6540F71 - BLUE/WHITE Super Combo
• TT6540F73 - PURPLE/WHITE Super Combo
• TT6540F74 - GREEN/WHITE Super Combo
• TT6540F76 - RED/WHITE Super Combo 

**** Battery and charger not included

You’re looking at the wildest fire-breathing ready-to-run mini monster truck on the market today! Our new mini trucks shatter the price barrier, making exciting R/C performance available to everyone!

Thunder Tigers mighty mini monster truck performs where the others can only dream of going! Safe, quiet, and powerful, this electric mini monster truck can run indoors. The smallest outdoor space becomes your personal off-road track! Quality, speed and performance are now surprisingly affordable!

With these beasts nothing is too big or small. Included are a six cell rechargeable battery and charger. The stock 280 motor will have you popping wheelies and smoking the competition. The 2 channel ACE R/C system will let you have extended range compared to your friends, while they are glitching out of control you will be headed for the monster double. When you come up to the woops or off-road terror these cats just purrr with their oil filled shocks.

The ZK-2 now offers the most renowned classic vintage bodyshells. The popular and famous VW BEETLE AND CITROEN 2CV

Features:

• Super Combo - includes everything you need to go.
• 280 stock motor. (Can be upgraded to a 380)
• PCM/FM 2 Channel pistol grip radio system.
• Digital IC Chip integrated RX/ESC.
• Replaceable servo.
• Three gear, 1/10th Grade transmission gears.
• Fully independent suspension with oil filled shocks.
• Composite parts throughout.
• Complete with 1100mAh NiMh racing pack and AC charger.
• Full range of racing option parts available.

Specifications:

• Length - 240mm
• Width - 182mm
• Height - 80mm
• Wheelbase - 146mm
• Ground Clearance - 180mm

Models Available:

• TT6551F37 - CITROEN 2CV
• TT6551F38 - VW BEETLE

Accessories:

• AQ0592 - All in ESC & RX
• PD2235 - 7.2V 1100 MAH Battery pack

You’re looking at the wildest fire-breathing ready-to-run mini monster truck on the market today! Our new mini trucks shatter the price barrier, making exciting R/C performance available to everyone!

Thunder Tigers mighty mini monster truck performs where the others can only dream of going! Safe, quiet, and powerful, this electric mini monster truck can run indoors. The smallest outdoor space becomes your personal off-road track! Quality, speed and performance are now surprisingly affordable!

With these beasts nothing is too big or small. Included are a six cell rechargeable battery and charger. The stock 280 motor will have you popping wheelies and smoking the competition. The 2 channel ACE R/C system will let you have extended range compared to your friends, while they are glitching out of control you will be headed for the monster double. When you come up to the woops or off-road terror these cats just purrr with their oil filled shocks.

Features:

• Super Combo - includes everything you need to go.
• 280 stock motor. (Can be upgraded to a 380)
• PCM/FM 2 Channel pistol grip radio system.
• Digital IC Chip integrated RX/ESC.
• Replaceable servo.
• Three gear, 1/10th Grade transmission gears.
• Fully independent suspension with oil filled shocks.
• Composite parts throughout.
• Complete with 1100mAh NiMh racing pack and AC charger.
• Full range of racing option parts available.

Specifications:

• Length - 240mm
• Width - 182mm
• Height - 80mm
• Wheelbase - 146mm
• Ground Clearance - 180mm

Models Available:

• TT6551F33 - ZK2 - PURPLE/WHITE
• TT6551F34 - ZK2 - GREEN/WHITE
• TT6551F35 - ZK2 - BLUE/WHITE
• TT6551F36 - ZK2 - RED WHITE

Accessories:

Thunder Tigers mighty mini truck performs where the others can only dream of going! Safe, quiet, and powerful, this electric mini monster truck can run indoors. The smallest outdoor space becomes your personal off-road track! Quality, speed and performance are now surprisingly affordable!

With these beasts nothing is too big or small. Included are a six cell rechargeable battery and charger. The stock 280 motor will have you popping wheelies and smoking the competition. The 2 channel ACE R/C system will let you have extended range compared to your friends, while they are glitching out of control you will be headed for the monster double. When you come up to the woops or off-road terror these cats just purrr with their oil filled shocks.

Features:

• 100% Assembled
• 2-Channel Radio installed
• Super Combo includes everything you need, no extras to buy
• Equipped stock 280 super motor
• Digital IC decoder integrate receiver and ESC functions
• Automatic throttle lock (A-T-L)
• Gear transmission with 1:10th grade differentials
• Fully independent suspension with oil filled shocks
• Race tough composite parts
• Powerful 1100mAh, 6 cell rechargeable Ni-MH power pack
• AC charger included
•  Micro size servo
• Large range of racing option parts available

Specifications:

• Length: 240mm
• Width: 182mm
• Height: 80mm
• Wheelbase: 146mm
• Ground Clearance: 18mm

Models Available:

• TT6552F31 - BLUE
• TT6552F32 - RED
• TT6552F33 - RED/BLACK
• TT6552F34 - WHITE/BLACK
• TT6552F35 - BLUE/BLACK

Accessories:

• AQ0592 - All in ESC & RX
• PD2235 - 7.2V 1100 MAH Battery pack

The Sparrowhawk DX is a new chassis derived from the original Sparrowhawk VX; upgraded with specifically-designed slick drift tires and stunning body kits for high-performance drifts. Now equipped with four oil-filled shock absorbers, the Sparrowhawk DX is the only Ready Set car equipped with LED control system and 14-20 LED lights ( accurate LED numbers varies according to car body style), creating realistic LED light effects when used on a stunning tuner lexan polycarbonate body and chrome-plated light casings. Headlights, tail lights, passing and turn signal lights, brake lights, fog lights, blinking hazard lights, quick-flash during acceleration and incredible reverse sound. Everything is included in the box, no modification required! For all those who want to take their tuner car body to the extreme.

100% factory assembled chassis with complete ACE RC JG-2CH R/C system installed. ACE R/C VELOCI-R forward/reverse ESC mounted. Loaded with Super Sports 17T motor.

Pre-cut body with complete painting and decals applied. Battery pack and charger may need to be purchased separately.

Specifications:

• Length:368mm (14.50in)
• Width:190.5mm (79.50in)
• Wheelbase:263.5mm(10.38in)
• Weight:1100g Approx. (2.42lb)
• (Battery Not Included)

Key Features:

• 4WD shaft-driven bathtub chassis w/ countersunk battery tray
• Full ball bearings
• Cast aluminum motor plate and mount
• Full double wishbone adjustable suspension
• Hardened steel gear differentials and sealed gear box
• Carbon plastic suspension components
• Assembled and glued chrome wheels and slick drift tires
• Independent oil-filled coil-over shocks
• Fully upgradeable with hop-ups
• ACE RC R/C AM 2-Channel radio gear
• Digital electronic speed control

• RTR set comes with LED control system and 14-20 LED lights

The TOMAHAWK VX is the latest evolution in 1/10th scale touring cars. The chassis has been designed to simplify maintenance and general use without sacrificing its high performance features and parts durability.

Equipped with a durable & powerful PRO-18BX (3.0 cc) pullstart engine which combined with the 4WD shaft drive train delivers the most effective traction for consistent control and top speed. Want more speed?. No problem. The TOMAHAWK VX is supplied with a factory installed 2-speed transmission to fulfil the needs of all speed freaks. Experiencing the thrill of on-road nitro car racing has never been easier than this. No matter where you drive, club or car park, the TOMAHAWK VX is definitely your best choice!

Features:

• Fully assembled shaft driven 4WD chassis
• Double-wishbone front and rear suspension
• Fully ballraced drive train
• Covered RX box for electronics protection
• Heavy duty oil-filled shocks
• Thick 2.5mm anodized aluminum alloy chassis
• Fully adjustable racing suspension geometry
• Durable & powerful Pro-18BX (3.0 cc) engine
• Automatic 2-speed transmission
• Reinforced one-piece resin steering turnbuckles.
• Versatile modular design for ease of maintenance and modification
• Race ready slick tires  
• ALL Radio equipment supplied and installed

Specifications:

• Length:432mm
• Width: 200mm
• Height: 110mm
• Wheelbase: 265mm
• Rim: 52/26mm
• Tire: 64mm
• Weight: 1650g approx.

The TOMAHAWK VX is the latest evolution in 1/10th scale touring cars. The chassis has been designed to simplify maintenance and general use without sacrificing its high performance features and parts durability.

Equipped with a durable & powerful PRO-18BX (3.0 cc) pullstart engine which combined with the 4WD shaft drive train delivers the most effective traction for consistent control and top speed. Want more speed?. No problem. The TOMAHAWK VX is supplied with a factory installed 2-speed transmission to fulfil the needs of all speed freaks. Experiencing the thrill of on-road nitro car racing has never been easier than this. No matter where you drive, club or car park, the TOMAHAWK VX is definitely your best choice!

Features:

• Fully assembled shaft driven 4WD chassis
• Double-wishbone front and rear suspension
• Fully ballraced drive train
• Covered RX box for electronics protection
• Heavy duty oil-filled shocks
• Thick 2.5mm anodized aluminum alloy chassis
• Fully adjustable racing suspension geometry
• Durable & powerful Pro-18BX (3.0 cc) engine
• Automatic 2-speed transmission
• Reinforced one-piece resin steering turnbuckles.
• Versatile modular design for ease of maintenance and modification
• Race ready slick tires  
• ALL Radio equipment supplied and installed

Specifications:

• Length:432mm
• Width: 200mm
• Height: 110mm
• Wheelbase: 265mm
• Rim: 52/26mm
• Tire: 64mm
• Weight: 1650g approx.

The TOMAHAWK VX is the latest evolution in 1/10th scale touring cars. The chassis has been designed to simplify maintenance and general use without sacrificing its high performance features and parts durability.

Equipped with a durable & powerful PRO-18BX (3.0 cc) pullstart engine which combined with the 4WD shaft drive train delivers the most effective traction for consistent control and top speed. Want more speed?. No problem. The TOMAHAWK VX is supplied with a factory installed 2-speed transmission to fulfil the needs of all speed freaks. Experiencing the thrill of on-road nitro car racing has never been easier than this. No matter where you drive, club or car park, the TOMAHAWK VX is definitely your best choice!

Features:

• Fully assembled shaft driven 4WD chassis
• Double-wishbone front and rear suspension
• Fully ballraced drive train
• Covered RX box for electronics protection
• Heavy duty oil-filled shocks
• Thick 2.5mm anodized aluminum alloy chassis
• Fully adjustable racing suspension geometry
• Durable & powerful Pro-18BX (3.0 cc) engine
• Automatic 2-speed transmission
• Reinforced one-piece resin steering turnbuckles.
• Versatile modular design for ease of maintenance and modification
• Race ready slick tires  
• ALL Radio equipment supplied and installed

Specifications:

• Length:432mm
• Width: 200mm
• Height: 110mm
• Wheelbase: 265mm
• Rim: 52/26mm
• Tire: 64mm
• Weight: 1650g approx.

Have you been waiting for a real Ready to Run? Thunder Tiger is taking the RTR concept to the next level. Introducing the EB-4 S2 super combo

Start with the National Champion EB-4, add in a high torque steering servo, have it expertly built, toss on the included printed body and right away, you are enjoying what we define as "True performance RTR". This is no cheap wannabe! The EB-4 S2 super combo can grow as your skills grow. Time from box to track is measured in minutes not days. Super Combos from Thunder Tiger will change everyone’s mind about what a RTR should be.

Features:

• 100% Assembled
• 2-Channel Radio installed
• High torque MG steering servo
• Printed body with decals
• Race-proven suspension geometry
• Durable gear differential system
• Double high-density annular foam air filter
• Strong fibreglass reinforced composite parts
• Sturdy aluminium chassis
• Aluminium front & rear shock tower
• Thunder Tiger PRO-21BX-R (P) engine with pull start
• High performance bulldog rubber tires
• Adjustable aluminium large volume, competition shocks
• Front ball type universal drive shaft
• Ventilated Flywheel
• High performance tune pipe and manifold
• Adjustable Toe-in / camber / caster angle

Specifications:

• Front Kick-Up: 5°
• Front Caster: adjustable from 18° to 25°
• Rear Anti-Dive: 2°
• Rear Toe-In: 1°, 2° or 2.5°
• Wheelbase: 315mm ~ 320mm
• FR/RR Track: 295mm ~ 305mm/300mm
• Weight: 3100 g. w/engine, tuned pipe, servo

Available as:

• TT6226F34 - Orange
• TT6226F35 - Green
• TT6226F36 - Silver

Experience the most outstanding performance ready to run buggy ever.  The EB-4 S3 RTR is a fully assembled nitro racing buggy that shares 90% of the same parts as the ROAR championship winner –the EB-4 S3 Pro Kit.

The EB-4 S3 RTR features the powerful Thunder Tiger PRO-28 pull start engine and the ever popular TT Jaguar radio system, all factory installed for complete and total driving control. A full line of Factory Approved Team performance parts are available for the EB-4 S3 RTR, to let you trick out your buggy to your specifications!

 Features:

• Anodized chassis with narrow configuration for stable handling
• Easily adjustable front pivot-ball suspension
• Full metal oil-filled shocks with large volume anodized shock bodies
• Thunder Tiger Pro-28 ball-raced pullstart engine with slide carburettor
• Dual stage air cleaner
• Polished CNC machined aluminium tuned pipe and manifold
• 3 small-lightened gear differentials with constant shaft driven 4WD design
• Dual metal brake disc
• Heavy duty CVD universal front drive train
• Lightened and small size flywheel
• Anodized alloy front brace, radio tray and centre diff top plate
• Enclosed dust-resistant radio & battery box
• Laid down steering servo for low centre of gravity
• Captured hinge pins require no retaining clips
• Complete set of rubber-sealed ball bearings included
• Wheels, printed polycarbonate body and one piece nylon wing all included

Specification:

• Length: 496mm
• Width: 305mm
• Height: 180mm
• Weight: 3400g
• Wheelbase: Adjustable from 320mm to 330mm

Available as:

• TT6231F31 – Orange
• TT6231F32 – Blue 

The TOMAHAWK VX is the latest evolution in 1/10th scale touring cars. The chassis has been designed to simplify maintenance and general use without sacrificing its high performance features and parts durability.

Equipped with a durable & powerful PRO-18BX (3.0 cc) pullstart engine which combined with the 4WD shaft drive train delivers the most effective traction for consistent control and top speed. Want more speed?. No problem. The TOMAHAWK VX is supplied with a factory installed 2-speed transmission to fulfil the needs of all speed freaks. Experiencing the thrill of on-road nitro car racing has never been easier than this. No matter where you drive, club or car park, the TOMAHAWK VX is definitely your best choice!

Features:

• Fully assembled shaft driven 4WD chassis
• Double-wishbone front and rear suspension
• Fully ballraced drive train
• Covered RX box for electronics protection
• Heavy duty oil-filled shocks
• Thick 2.5mm anodized aluminum alloy chassis
• Fully adjustable racing suspension geometry
• Durable & powerful Pro-18BX (3.0 cc) engine
• Automatic 2-speed transmission
• Reinforced one-piece resin steering turnbuckles.
• Versatile modular design for ease of maintenance and modification
• Race ready slick tires  
• ALL Radio equipment supplied and installed

Specifications:

• Length:432mm
• Width: 200mm
• Height: 110mm
• Wheelbase: 265mm
• Rim: 52/26mm
• Tire: 64mm
• Weight: 1650g approx.

Thunder Tigers meanest monster truck, the MTA4 S28 Is powered by a 4.60-size nitro engine with a unique dual-starting system, tuned pipe, disc brake, and eight oil-filled shocks.

The MTA4 S28 has all the features you loved on the original MTA4, and now Thunder Tiger has added a few more! At the heart of the new MTA4 beats the TT PRO28 engine which has increased displacement of 33%, making the MTA4 S28 deliver more horsepower and stump-pulling torque!

To make sure all of that extra power gets down to the ground, the MTA4’s 2-speed transmission now comes equipped with new tough steel gears and steel CVAs that are up to the job of handling the massive torque. The current rugged extruded aluminium chassis, oil filled shocks and huge mounted all-terrain tires give the MTA4 over 4 inches of ground clearance, letting you take that power over almost any obstacle. The new MTA4 comes with the TT Jaguar radio system that is factory installed for complete and total driving control. A full line of genuine Factory Team performance parts are available for the MTA4 S28, to let you trick out your truck to your specifications.

NOW INCLUDES 2.4GHz RADIO SYSTEM

Features:

• High-performance tuned racing pipe with single outlet diverts exhaust out the bottom of the truck
• Massive single-disc brake for positive, no-fade stopping power
• Sealed receiver box protects radio gear from dirt, dust and moisture
• All radio gear easily removable (with just four screws) for truck cleaning
• PRO 28 Engine with the unique Dual-Start system: Convenient pull start or
• Hex-shaft/drill start combined in one unit!
• Large-bore aluminium-bodied carburettor and two-stage foam element air filter.
• 7075 T-6 connecting rod. Fan-type flywheel provides additional cooling
• Two painted body styles to choose from

Specifications:

• Wheelbase: 368mm
• Width: 438mm
• Weight:  5.6 kg.
• Chassis: Extruded main chassis with moulded side plates.
• Drive train type: Shaft-driven 4WD,
• 15T clutch bell Spur Gear
• Transmission ratios: 8.132:1 1st gear / 5.624:1 2nd gear

Models Available:

• TT6228F71 - MTA4 S28 Orange
• TT6228F72 - MTA4 S28 Blue

The TOMAHAWK VX is the latest evolution in 1/10th scale touring cars. The chassis has been designed to simplify maintenance and general use without sacrificing its high performance features and parts durability.

Equipped with a durable & powerful PRO-18BX (3.0 cc) pullstart engine which combined with the 4WD shaft drive train delivers the most effective traction for consistent control and top speed. Want more speed?. No problem. The TOMAHAWK VX is supplied with a factory installed 2-speed transmission to fulfil the needs of all speed freaks. Experiencing the thrill of on-road nitro car racing has never been easier than this. No matter where you drive, club or car park, the TOMAHAWK VX is definitely your best choice!

Features:

• Fully assembled shaft driven 4WD chassis
• Double-wishbone front and rear suspension
• Fully ballraced drive train
• Covered RX box for electronics protection
• Heavy duty oil-filled shocks
• Thick 2.5mm anodized aluminum alloy chassis
• Fully adjustable racing suspension geometry
• Durable & powerful Pro-18BX (3.0 cc) engine
• Automatic 2-speed transmission
• Reinforced one-piece resin steering turnbuckles.
• Versatile modular design for ease of maintenance and modification
• Race ready slick tires  
• ALL Radio equipment supplied and installed

Specifications:

• Length:432mm
• Width: 200mm
• Height: 110mm
• Wheelbase: 265mm
• Rim: 52/26mm
• Tire: 64mm
• Weight: 1650g approx.

The TOMAHAWK VX is the latest evolution in 1/10th scale touring cars. The chassis has been designed to simplify maintenance and general use without sacrificing its high performance features and parts durability.

Equipped with a durable & powerful PRO-18BX (3.0 cc) pullstart engine which combined with the 4WD shaft drive train delivers the most effective traction for consistent control and top speed. Want more speed?. No problem. The TOMAHAWK VX is supplied with a factory installed 2-speed transmission to fulfil the needs of all speed freaks. Experiencing the thrill of on-road nitro car racing has never been easier than this. No matter where you drive, club or car park, the TOMAHAWK VX is definitely your best choice!

Features:

• Fully assembled shaft driven 4WD chassis
• Double-wishbone front and rear suspension
• Fully ballraced drive train
• Covered RX box for electronics protection
• Heavy duty oil-filled shocks
• Thick 2.5mm anodized aluminum alloy chassis
• Fully adjustable racing suspension geometry
• Durable & powerful Pro-18BX (3.0 cc) engine
• Automatic 2-speed transmission
• Reinforced one-piece resin steering turnbuckles.
• Versatile modular design for ease of maintenance and modification
• Race ready slick tires  
• ALL Radio equipment supplied and installed

Specifications:

• Length:432mm
• Width: 200mm
• Height: 110mm
• Wheelbase: 265mm
• Rim: 52/26mm
• Tire: 64mm
• Weight: 1650g approx.

The MTA4 Sledge Hammer S50 is ready to smash all its rivals. Take the ever popular MTA4 truck and combine it with the all new, massively powerful PRO50-BK engine and you have a seriously mean piece of kit. To make sure all that extra power gets down on to the ground, the 2-speed transmission now comes equipped with new tough steel gears and steel CVA’s that are up to the job of handling the massive torque.

NOW INCLUDES 2.4GHz RADIO SYSTEM

Features:

• Oversized heat sink head & engine mount
• New slipper clutch kit
• 2 speed transmission
• New ultra tough steel spur gear
• New heavy duty CVA’s
• New high performance tuned pipe
• New stiffer shock springs
• New PRO-50BK shaft start engine
• New style body and decals
• New chrome wheels and high grip tyres
• New rear wheelie bar
• Includes hand held starter unit

Specifications:

• Length: 558mm
• Width: 438mm
• Height: 273mm
• Wheelbase: 368mm
• Weight: 6200g
• Ground clearance: 108mm

Available:

• TT6225F71 - Red
• TT6225F72 - Blue

Thunder Tigers latest off road buggy, The SPARROWHAWK XB is a race winner straight from the box. Its sleek lines and ultra low stance ensure the XB is quick down the straights and tight round the corners. Race winning performance has never been so affordable.

NOW INCLUDES 2.4GHz RADIO SYSTEM

Specifications:

• Completely factory assembled and printed
• Composite tub chassis w/countersunk battery tray
• 4WD shaft driven off-road buggy
• Front and rear universal (CVA)
• 4 oil-filled coil over shock absorbers
• Standard competition slipper clutch
• Full ball bearings on axles
• Cast aluminium motor plate and mount
• Ultra long racing suspension arms
• Hardened steel gear differentials
• Race ready glued wheels and tires
• 2.4GHz radio gear
• High performance electronic speed control
• Super performance 17 Turn Sports Motor

Key Features:

• Combined design of steel universal drive shafts and aluminium hex hubs for most convenient wheel fitting and for most efficient power transfer.
• High down force rear wing mount not only maximizes aerodynamic efficiency but also help to prevent the damages of the chassis when crashes.
• 7mm thick crash resistant composite shock towers for maximum strength and flexible mounting locations.
• Ball raced steering bell cranks optimize the range of steering control and enhance the control precision.
• Factory assembled oil-filled shocks for extra smoothness, less maintenances.
• Ultra long racing wishbones feature a sleek aerodynamic design with integrated webbing to provide extra strength. 
• Reinforced double deck chassis design makes the car stiffer and resists twisting; connecting the front and rear moulded composite gearboxes allows the most brutal off-road driving abuse.
• Interchangeable front and rear steel gear differentials give most consistent drivability and best cornering performance. 
• New adjustable slipper clutch for ease of access to adjust tightness. Gives you more control and improved acceleration 
• The centre drive shafts are made from extra-thick anodized aluminium to increase durability and resist wear. 
• Completely factory assembled chassis and printed aerodynamic body & wing, ready to hit the track out of box.
• Strong and lightweight spoke wheels with pre-glued high-grip pin tires.
• Sturdy countersunk battery tray and strap for quickest battery fitting
• High performance electronic speed control and super performance 17 Turn Sports Motor
• Full ball bearings for most efficient power transmission

Available As:

• TT6536F71 - White/Blue
• TT6536F72 - Purple/Black

**** Battery and charger not included

Thunder Tiger SPARROWHAWK XT set the standard in1/10 scale 4WD electric stadium, and took aim to provide the bashers the fastest and most affordable electric stadium racer ever. The XT with the same wide-width suspension and 4-wheel drive capability as the TOMAHAWK ST, the XT’s drivability totally out-performs all of its electric competition. The XT sports a new look and has more power with a Super Sports 19-Turn 550 type modified motor; high-power forward/Reverse/Brake Veloci RS ESC and an externally adjusted dual-pad slipper clutch, which transfers power to the ground more efficiently and effectively.

The XT’s extended battery tray allows user to arrange power system flexibly than ever. By using a battery pack up to 8.4V(Not included), the XT delivers wicked bottom-end torque for amazing launches along with rock-fast acceleration and expands the run times longer than a regular 7.2V battery. The XT is built tough for rough and tumble play and adds to your racing edge with full sets of ball bearing, a fully adjustable suspension, 4 sets of oil-filled shocks, a whole new strengthened dual-deck layout composite chassis and full equipped heavy duty steel CVAs. XT’s speed, durability, and versatility enable XT to go where other electric 2WD stadium tucks wouldn’t dare.

NOW INCLUDES 2.4GHz RADIO SYSTEM

Features:

•  Factory assembled
• Composite tub chassis with countersunk battery tray
• 4WD shaft driven off-road truck
• Front and rear universal (CVA)
• Oil-filled coils over shock absorbers
• Full ball bearings on axles
• Cast aluminium motor plate and mount
• Extra long racing suspension arms
• Hardened steel gear differentials
• Race ready glued wheels and tires
• 2.4GHz radio gear
• High performance electronic speed control
• Super performance 19 Turn 550 type Motor
• Fully upgradeable with hop-ups
• Competition slipper clutch

Specifications:

• Wheelbase 277.83mm
• Weight 1.66kg
• Length  435.48 mm
• Width 331.72 mm
• Height 165.2 mm
• Ground Clearance 34 mm
• Drive train/Pulley ratio 1:11.08
• Motor 19-turn SUPER SPORTS motor

**** Battery and charger not included

The Thunder Tiger ST-1 is intended for racing and has been designed to be a pure competition truck with ultra-wide suspension arms, low center of gravity, and super sturdy chassis for excellent handling characteristics

The ST-1 comes with a race proven extra-long anodized aluminum chassis for added durability, super strong composite arms, and adjustable pivot balls. Both front and rear sway bars are also standard. An oversized 150cc fuel tank will squeeze the fuel to the last drop to maximize your run time with the brand-new Thunder Tiger PRO-28BX-R engine already installed.

A 3mm thick Ti anodized aluminum parts give the truck the most distinctive look without compromising durability, and the lay-down style steering servo installation further lowers the center of gravity. All suspension geometry angles are adjustable, including front and rear toe-in, camber, and caster. No need to purchase optional hub carriers to tune the geometry. The reliable and convenient pillow ball system and various interchangeable squat blocks solve the problem at once. The ST-1 comes with high-quality CV drive shafts and bearings to enable you to have the smoothest action but sharp acceleration. Besides these standard features, the optional two-speed transmission is a must.

Features:

• Powerful 4.60cc PRO-28BX-R pull start engine with two needle slide carburetor
• TI-color anodized radio tray and steering brace
• Extra long and rigid suspension arms provide superior handling and better cornering ability
• 3 sets of durable gear differentials
• 8 spoke chrome wheels & race ready high grip tires
• Lowest C.G. provides stable handling and resists rollovers
• Fully equipped C.V. driveshafts, front, rear and center
• Enclosed radio box enables to install 5AA size batteries
• 150cc large capacity fuel tank with large fuel splash guard
• 4 machined aluminum oil-filled shocks with 3.5mm shafts, 8 shocks maximum possible
• Tuned pillow ball front suspension system for ease of camber tuning
• Variable toe & squat blocks equipped
• Aluminum tuned pipe & header
• High torque 8.Kg metal gear steering & throttle/brake servo included
• Full set of ball bearings to keep drivetrain components spinning freely
• Composite 3-shoe clutch
• Dual oil-resistant fiber disc brakes
• 3.5mm front/rear sway bar included
• 17mm hex drives fit Pro-Line 40 series tires

Specifications:

• Length: 485mm
• Width: 380mm+/-5mm
• Height: 182mm
• Wheelbase: 349mm ~ 365mm
• FR/RR Track: 335mm ~ 345mm/340mm
• Weight: 3920g
• Ground Clearance: 48mm

Models Available

• TT6233F31 - ST1 Orange/Blue
• TT6233F32 - ST1 Purple/Blue
• TT6233F33 - ST1 Red/Black

Recommended items:

• Receiver pack and  charger

The TOMAHAWK VX is the latest evolution in 1/10th scale touring cars. The chassis has been designed to simplify maintenance and general use without sacrificing its high performance features and parts durability.

Equipped with a durable & powerful PRO-18BX (3.0 cc) pullstart engine which combined with the 4WD shaft drive train delivers the most effective traction for consistent control and top speed. Want more speed?. No problem. The TOMAHAWK VX is supplied with a factory installed 2-speed transmission to fulfil the needs of all speed freaks. Experiencing the thrill of on-road nitro car racing has never been easier than this. No matter where you drive, club or car park, the TOMAHAWK VX is definitely your best choice.

Features:

• Fully assembled shaft driven 4WD chassis
• Double-wishbone front and rear suspension
• Fully ballraced drive train
• Covered RX box for electronics protection
• Heavy duty oil-filled shocks
• Thick 2.5mm anodized aluminum alloy chassis
• Fully adjustable racing suspension geometry
• Durable & powerful Pro-18BX (3.0 cc) engine
• Automatic 2-speed transmission
• Reinforced one-piece resin steering turnbuckles.
• Versatile modular design for ease of maintenance and modification
• Race ready slick tires  
• ALL Radio equipment supplied and installed

Specifications:

• Length:432mm
• Width: 200mm
• Height: 110mm
• Wheelbase: 265mm
• Rim: 52/26mm
• Tire: 64mm
• Weight: 1650g approx.

The TOMAHAWK BX sets a new benchmark for 1/10th off road racing buggies.

It is equipped with the powerful PRO-18BX pull start engine which will deliver power when you need it. The balanced chassis and ultra wide track gives amazing performance through all the bends and gives a stable platform when going over jumps.

With a 3 diff set up and a 4WD shaft driven design, the TOMAHAWX BX is not just a fun car but a winning car. 

NOW INCLUDES 2.4GHz RADIO SYSTEM 

Key Features:

• Covered RX/Battery box
• Threaded Aluminium oil filled shocks
• 2.5mm anodized countersunk chassis
• FR & RR disc brake system
• FR & RR universals
• Adjustable caster/toe/anti squat
• Aluminium tuned pipe and muffler
• Ultra long racing arms
• 75cc fuel tank

Specifications:

• Length - 390mm
• Width - 245mm
• Wheelbase - 272mm
• Weight - 1800g apx

Introducing the Thunder Tiger Tomahawk ST 4WD RTR off-road truggy. The TOMAHAWK ST is the rule for off-road sports racing. Equipped with powerful PRO-18BX (3.0cc) engine, the truck is unstoppable.

Sweep away the neighbourhood racing circuit in a most elegant way. The ultra wide span suspension arms support the most stable handling and grip pin tires cut the corner sharply. 4 large capacity oil shocks conquer the jumps and gaps as like it’s never been there. You will never know how fast it is, because the TOMAHAWK ST creates the road and sets no boundaries for its following competitor.

NOW INCLUDES 2.4GHz RADIO SYSTEM 

Key Features:

• Preinstalled radio gears in sealed RX box
• Maximum 3 gear differentials upgradeable (Centre diff for option)
• 4WD shaft driven off-road truggy
• 4 oil-filled coilover shock absorbers
• Thick 3.0mm anodized countersunk chassis
• Heavy duty fibreglass disc brake
• Front and rear universal shaft (CVAs)
• Durable & powerful Pro-18BX (3.0cc) engine w/recoil pull start
• Aluminium tuned pipe and manifold
• Full ball bearings on all axles
• Ultra long racing suspension arms
• Aluminium toe plate
• 75cc large capacity fuel tank
• Pre-printed and trimmed body

Specifications:

• Length: 450mm
• Width: 330mm
• Wheelbase: 295mm
• Tire size: Front / Rear 52mm x 102mm
• Wheel size: Front / Rear 50mm x 60mm
• Weight: 2030g
• Height: 150mm
• Max G. Clearance: 34mm

Available as:

• TT6197F71 - RED
• TT6197F72 - BLUE

Double front friction-damped forks and adjustable rear oil-filled monoshocks provide excellent responsiveness and handling just like the real machine. Machined aluminium wheels are rigid, durable and light. Aluminium side frames which are strong and rigid make the Ducati 999R responsive, light and fast.

Life-like rider completes the experience creating a visually exciting bike. High-performance motor with chain drive output creates maximum power. A Thunder Tiger PRO-12BK engine with convenient shaft start. If you are a motor sports enthusiast, you definitely won’t miss this fascinating machine, the new lead of the gas powered bike.

Features:

• 100% factory assembled
• Factory painted Ducati 999R Race version bodywork
• Updated Vinyl rider figure
• Powerful PRO-12BK engine with hex starter
• Functional front and rear suspension
• Aluminium spring loaded upside down front fork
• Aluminium rear oil-filled adjustable monoshock
• Aluminium rear swing arm
• Aluminium front and rear wheels
• Aluminium side frame
• Chain drive and with ball bearing drive-train
• Rear disc brake
• High grip, racing slick tires
• The oil-filled damper lets the steering deflect bumps in case of front wheel encounters
• Circular, roll-over protection wire

Specifications:

• Length: 440mm
• Width: 180mm
• Height: 285mm
• Wheelbase: 295mm
• Weight: 1,975 g. (RTR)

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable – proven in over 50,000,000 launches!

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable – proven in over 50,000,000 launches!

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable -proven in over 50,000,000 launches!

  • Horizontal steering servo 6 kg metal gears • Adjustable camber/track/caster action • Full-time prop 4WD for max acceleration • 4.6 ccm AR-28 Force engine / pullstart • 3-shoe racing clutch • Hardened drive shafts • 3 mm aluminium chassis (T6) with countersunk screws • Vented and adjustable disc brakes f/r • Splash-proof RC box • Maintenance-free, gasket-sealed differentials • Rear chassis brace • Performance enhancing exhaust system • Pre-glued tyre set • Pre-designed body with decals • Heavy-duty steel spur gear • Stabilizers front and rear • Aluminium suspension arm mounts • Adjustable 1:5 scale aluminium threaded oil shocks • Steering technology with C-Hubs and aluminium steering arms • Right-left-threaded tie rods on the front axle 

SPECIFICATIONS

• Scale 1:8 • Drive 4WD (all-wheel) • Assembly Pre-assembled • Engine AR-28 • Length 500 mm • Width 440 mm • Wheelbase 360 mm • Clearance 65 mm 

ITEMS NEEDED

• Nitro Fuel • Fuel Bottle • Glow Starter & Charger • 12x AA Batteries • Cold Glow Plug

ITEMS NEEDED • Nitro Engine • Nitro Fuel & Fuel Bottle • Glow Starter & Charger • Radio System: Transmitter, Receiver, 2 Servos, 12x AA Batteries • Tools for assembly

FEATURES • Pre-assembled vehicle • Pre-installed, ready-to-run 40mhz radio system • Horizontal steering servo 6 kg MG • Pivot ball system f/r • Adjustable camber/track/caster action • Full-time prop 4WD for max acceleration • 3.5 ccm AR-21R Force engine / pullstart • 3-shoe racing clutch • Hardened drive shafts • 3 mm aluminium chassis (T6) with countersunk screws • Vented, adjustable disc brake • Splash-proof RC box • Maintenance-free, gasket-sealed differentials • Aluminium oil shocks • Rear chassis brace • 17 mm standard hex wheel hub • Performance enhancing exhaust system • Adjustable spoiler for more contact pressure • Pre-glued tyre set • Pre-designed body with decals • Steel spur gear ITEMS NEEDED

• Fuel • Fuel Bottle • Glow Starter • 12 AA Batteries • Cold glow plug

FEATURES • Pre-assembled vehicle • Low centre of gravity • Horizontal steering servo • Pivot ball system f/r • Adjustable camber/track/caster action • Full-time 4WD for max acceleration • 3-shoe racing clutch • + Splash-proof RC box • Maintenance-free, gasket-sealed differentials • Aluminium oil shocks • Rear chassis brace • 17 mm standard hex wheel hub • Performance enhancing exhaust system • Adjustable spoiler for more contact pressure • 3 mm aluminium chassis (T6) with countersunk screws • Vented, adjustable disc brake • Pre-glued tyre set

ITEMS NEEDED • Nitro Engine • Fuel • Fuel Bottle • Glow Starter • Radio Gear: Transmitter, Receiver, 2x Servos, Switch and Receiver Battery

NOTES • The shock absorbers and differentials with this kit are pre-built to save time in building your kit. The bodyshell is also pre-painted and cut, ready to race! • Unlike the picture, this kit version includes black wheels and a black wing.

The Art-Tech Cessna comes complete with all the equipment to get you out flying this great looking aircraft. Open the box and you will find the Cessna factory assembled with the radio equipment installed into the aircraft, this just leaves minor assembly for you to finish off the model.

The small but powerful 400 class brushed electric motor gives you more than enough power for taking off from short grass. Due to its light weight the Cessna is capable of flying very slowly, but equally is more than capable of mild aerobatics, making it a great all round fun model. With its stability and the ease of use, the Cessna is ideal for beginners.

Introducing the Art-Tech F4U Corsair, this great looking model is based on the iconic American aircraft well known for its use of aircraft carriers in the Second World War. Art-Tech's replica offers all the looks of the original with superb flight characteristics. The model has a very benign stall meaning it can be slowed right down for landing without the worry that goes with most models of fighter aircraft that they may fall out of the sky. The model has plenty of power for multiple take offs from grass, so why not practice some carrier landings with some markings on the field. The Corsair comes complete and ready to fly just requiring the wings and tail installing to be flight ready.

Specifications

• Wing span: 970mm (38")
• Length: 770mm (30")
• Weight: 580g
• Radio: 2.4GHz

The Decathlon is a lovely looking aircraft painted with the classic sun burst on the flying surfaces. With a trainer type high wing this model can be used as a beginner's plane but with a few adjustments of the large control surfaces it can give a whole lot of fun for the more experienced pilots as well. Long flight times, easy to fly, good looking and bursting with get up and go, it's time to find more room in your hanger.

Specification

• Wing span: 970mm
• Length: 770mm
• Weight:580mm

From Art tech is this great looking and even better flying Mustang, available in 2 different motor configurations both offering superb flying ability you will have hours of fun with this model. Average flight time on one battery is around quarter of an hour. The top package comes complete with brushless motor, li-poly battery, Charger and all the radio equipment including TX, and there is also a Brushed version with a brushed motor and nimh battery and all radio. Both models are 4 channel with fully proportional controls.

The Art-Tech P51-D Mustang is ideal for intermediates or advance pilots.

All Art Tech models comply with CE standards.

The mini Mustang from Art-Tech is the first in our new series of foam fighters, built for fun this model will bring a smile to the face of most experienced model pilots. Fast and agile with every thing included. Ready to go this has to be one for the weekend with such a small wingspan it could stay in the boot of your car.

Intermediate to Advanced.

Specifications:

Wingspan: 750mm
Length: 610mm
Weight: 378g

This stunning new model from Art-Tech is everything an aspiring modeller and pilot has ever wanted. The iconic lines of the Supermarine Spitfire have been captured beautifully on this model. The model comes completely built just requiring the wings and wheels attaching, once assembled you won't be able to contain your excitement until you have lifted her into the air. With super stable handling on both the ground and in the air you will be beating up the strip, looking out for the hun in the sun and admiring the superb scale like appearance in the air.

Specifications

• Wing span: 970mm (38")
• Length: 770mm (30")
• Weight: 580g
• Radio: 2.4GHz 

The all new Wing Dragon 4 has a full compliment of 4 proportional channels allowing full control of the model, the aircraft is able to perform a full range of aerobatic manoeuvres.

The model comes supplied with a 9.6v 1000mah battery, but you can also use the 8.4v pack if you want to slow things down a little.

The Art-Tech Wing Dragon is a novice to intermediates plane.

Everything required to fly is included with the model and the model requires minimal final assembly. All Art Tech models have 2.4GHz receivers and comply with CE standards.

The Wing Tiger from Art-Tech is the largest in the line of high winged trainer planes, with a wingspan of 1265mm and being 1170mm long! This model is powered by a 3 cell 11.1v 1800mah Li-Po battery paired with a brushless out-runnner motor providing all the propulsion needed to get you up in the air and around the skies. With full 4 channel control provided by the 2.4GHz transmitter, reciever and 4x9g servos pre-fitted, everything you could need is included in the box.

Flight times on a fully charged Li-Po pack are up to 1/4 of an hour.

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable – proven in over 50,000,000 launches!

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable – proven in over 50,000,000 launches!

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable – proven in over 50,000,000 launches!

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable -proven in over 50,000,000 launches!

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable – proven in over 50,000,000 launches!

The Baja 5B is a 1/5th scale off-road buggy that is nearly 32" in length! Its design is revolutionary for large scale RC Cars following the style of classic Baja buggies with long suspension arms for great ground clearance and large suspension travel. The big size allows the Baja 5B to go where smaller buggies can't and makes the Baja 5B's driving experience as close as you can get to the real thing. The Baja 5B is big, but coming as a "Ready To Run" car, and powered by standard petrol it can't be easier to get ready for action. Everything is included in the kit - a preassembled Baja 5B chassis with high quality FM radio gear and a preinstalled massive 23cc petrol engine providing plenty of power. All you need to do is fill up with standard petrol and some oil, and off you go! The innovative design of the Baja 5B has been developed and tested by HPI's designers over the last 18 months. Chassis Design The narrow channel chassis made from rigid 8mm (!!!) aluminium gives the Baja 5B the classic look and extreme stiffness and durability. Long Travel Suspension Fully adjustable double wishbone suspension with long travel aluminium shocks gives superior Off-Road capability. The narrow Chassis design allows for super long suspension arms which results in smooth damping characteristics and long suspension travel.

The 1/5th scale Baja 5B RWD desert racing buggy has been a huge success with RC fans, racers and journalists, and Baja owners have been extremely happy with the racing prowess, durability and qualities of the Baja 5B buggy. Now, HPI is proud to announce the Baja SS, a full-option Baja kit that you assemble yourself, loaded with tons of hop-ups that enhance the speed and power of the Baja 5B buggy, improve its durability even further, and provide totally sweet custom looks! The Baja SS follows the HPI innovation of upgraded ‘Super Sport' models that feature kit versions of popular HPI RTR models, with additional option parts added to enhance the enjoyment of your kit. A long list of option parts is included with the SS version of the Baja 5B. As you build the kit, you add in the options that come in the box, and add your own radio gear (receiver, throttle servo, and receiver battery).

Approved once again by World Champion Jorgen Andersson - the second-generation top performance F-1 tunnel hull is now available.35mm longer than the previous Bandit and with improved cutting. Available in three stunning and bright schemes, pre-finished by factory craftsmen. Perfect platform for the Thunder Tiger 3.5cc outboard marine engine. This advanced design has been optimized for speed and handling.

Features:

• High Performance Tunnel Hull design. Approved by World Champion Jorgen Andersson
• Light, yet Rigid Full Fibreglass Hull w/Vinyl Hull Stand
• Pre-painted w/ Cool Scheme Design
• Quick-Remove & Attach Upper Deck
• User-Friendly, No Need to Add Weight or Balance if TT OB Engine Installed

Specifications:

• Length: 848mm
• Beam: 293mm
• Weight: 1950g
• TT PRO-21M-OB Recommended

Versions Available:

• TT5210A11G – Bandit Green + PRO21 OB Engine
• TT5210A11O - Bandit Orange + PRO21 OB Engine
• TT5210A11Y - Bandit Yellow + PRO21 OB Engine

The ultimate radio controlled tank collection for every “wannabe” tank commander and they even fire BB pellets! Highly detailed with authentic colouring, these tanks feature a full function radio control unit to operate the left and right tracks, turret rotation, main gun elevation and the BB pellet firing mechanism.

BB pellets are supplied together with the tank battery and mains charger. Also available with lights and sound effects!

Features:

• 1/16th Scale
• 3 channel RC control
• Forward
• Reverse
• Turret Rotation
• Gun Barrel Elevation
• Automatic Electric Gun System
• Realistic Chassis
• Working Tracks
• Working Suspension

Effects Versions Feature:

• Realistic smoke
• Working lights
• Battle sounds including engine and machine gun fire

Track Upgrades Feature:

• Full metal tracks
• Metal drive wheels
• Upgraded motors and gears

Specifications:

• Length - 530mm
• Width - 232mm
• Height - 188mm

These tanks fire small BB pellets and are NOT suitable for children under 17 years of age.

The ultimate radio controlled tank collection for every “wannabe” tank commander and they even fire BB pellets! Highly detailed with authentic colouring, these tanks feature a full function radio control unit to operate the left and right tracks, turret rotation, main gun elevation and the BB pellet firing mechanism.

BB pellets are supplied together with the tank battery and mains charger. Also available with lights and sound effects. !

Features:

• 1/16th Scale
• 3 channel RC control
• Forward
• Reverse
• Turret Rotation
• Gun Barrel Elevation
• Automatic Electric Gun System
• Realistic Chassis
• Working Tracks
• Working Suspension

Effects Versions Feature:

• Realistic smoke
• Working lights
• Battle sounds including engine and machine gun fire

Track upgrades Feature:

• Full metal tracks
• Metal drive wheels
• Upgraded motors and gears

Specifications:

• Length - 530mm
• Width - 232mm
• Height - 188mm

These tanks fire small BB pellets and are NOT suitable for children under 17 years of age.

The ultimate radio controlled tank collection for every “wannabe” tank commander and they even fire BB pellets! Highly detailed with authentic colouring, these tanks feature a full function radio control unit to operate the left and right tracks, turret rotation, main gun elevation and the BB pellet firing mechanism.

BB pellets are supplied together with the tank battery and mains charger. Also available with lights and sound effects. !

Features:

• 1/16th Scale
• 3 channel RC control
• Forward
• Reverse
• Turret Rotation
• Gun Barrel Elevation
• Automatic Electric Gun System
• Realistic Chassis
• Working Tracks
• Working Suspension

Effects Versions Feature:

• Realistic smoke
• Working lights
• Battle sounds including engine and machine gun fire

Track Upgrades Feature:

• Full metal tracks
• Metal drive wheels
• Upgraded motors and gears

Specifications:

• Length - 530mm
• Width - 232mm
• Height - 188mm

These tanks fire small BB pellets and are NOT suitable for children under 17 years of age.

The ultimate radio controlled tank collection for every “wannabe” tank commander and they even fire BB pellets! Highly detailed with authentic colouring, these tanks feature a full function radio control unit to operate the left and right tracks, turret rotation, main gun elevation and the BB pellet firing mechanism.

BB pellets are supplied together with the tank battery and mains charger. Also available with lights and sound effects. !

Features:

• 1/16th Scale
• 3 channel RC control
• Forward
• Reverse
• Turret Rotation
• Gun Barrel Elevation
• Automatic Electric Gun System
• Realistic Chassis
• Working Tracks
• Working Suspension

Effects Versions Feature:

• Realistic smoke
• Working lights
• Battle sounds including engine and machine gun fire

Track Upgrades Feature:

• Full metal tracks
• Metal drive wheels
• Upgraded motors and gears

Specifications:

• Length - 530mm
• Width - 232mm
• Height - 188mm

These tanks fire small BB pellets and are NOT suitable for children under 17 years of age.

The ultimate radio controlled tank collection for every “wannabe” tank commander and they even fire BB pellets! Highly detailed with authentic colouring, these tanks feature a full function radio control unit to operate the left and right tracks, turret rotation, main gun elevation and the BB pellet firing mechanism.

BB pellets are supplied together with the tank battery and mains charger. Also available with lights and sound effects!

Features:

• 1/16th Scale
• 3 channel RC control
• Forward
• Reverse
• Turret Rotation
• Gun Barrel Elevation
• Automatic Electric Gun System
• Realistic Chassis
• Working Tracks
• Working Suspension

Effects Versions Feature:

• Realistic smoke
• Working lights
• Battle sounds including engine and machine gun fire

Track Upgrades Feature:

• Full metal tracks
• Metal drive wheels
• Upgraded motors and gears

Specifications:

• Length - 530mm
• Width - 232mm
• Height - 188mm

These tanks fire small BB pellets and are NOT suitable for children under 17 years of age.

The ultimate radio controlled tank collection for every “wannabe” tank commander and they even fire BB pellets! Highly detailed with authentic colouring, these tanks feature a full function radio control unit to operate the left and right tracks, turret rotation, main gun elevation and the BB pellet firing mechanism.

BB pellets are supplied together with the tank battery and mains charger. Also available with lights and sound effects!

Features:

• 1/16th Scale
• 3 channel RC control
• Forward
• Reverse
• Turret Rotation
• Gun Barrel Elevation
• Automatic Electric Gun System
• Realistic Chassis
• Working Tracks
• Working Suspension

Effects Versions Feature:

• Realistic smoke
• Working lights
• Battle sounds including engine and machine gun fire

Track Upgrades Feature:

• Full metal tracks
• Metal drive wheels
• Upgraded motors and gears

Specifications:

• Length - 530mm
• Width - 232mm
• Height - 188mm

These tanks fire small BB pellets and are NOT suitable for children under 17 years of age.

The ultimate radio controlled tank collection for every “wannabe” tank commander and they even fire BB pellets! Highly detailed with authentic colouring, these tanks feature a full function radio control unit to operate the left and right tracks, turret rotation, main gun elevation and the BB pellet firing mechanism.

BB pellets are supplied together with the tank battery and mains charger. Also available with lights and sound effects!

Features:

• 1/16th Scale
• 3 channel RC control
• Forward
• Reverse
• Turret Rotation
• Gun Barrel Elevation
• Automatic Electric Gun System
• Realistic Chassis
• Working Tracks
• Working Suspension

Effects Versions Feature:

• Realistic smoke
• Working lights
• Battle sounds including engine and machine gun fire

Track Upgrades Feature:

• Full metal tracks
• Metal drive wheels
• Upgraded motors and gears

Specifications:

• Length - 530mm
• Width - 232mm
• Height - 188mm

These tanks fire small BB pellets and are NOT suitable for children under 17 years of age.

The ultimate radio controlled tank collection for every “wannabe” tank commander and they even fire BB pellets! Highly detailed with authentic colouring, these tanks feature a full function radio control unit to operate the left and right tracks, turret rotation, main gun elevation and the BB pellet firing mechanism.

BB pellets are supplied together with the tank battery and mains charger. Also available with lights and sound effects!

Features:

• 1/16th Scale
• 3 channel RC control
• Forward
• Reverse
• Turret Rotation
• Gun Barrel Elevation
• Automatic Electric Gun System
• Realistic Chassis
• Working Tracks
• Working Suspension

Effects Versions Feature:

• Realistic smoke
• Working lights
• Battle sounds including engine and machine gun fire

Track Upgrades Feature:

• Full metal tracks
• Metal drive wheels
• Upgraded motors and gears

Specifications:

• Length - 530mm
• Width - 232mm
• Height - 188mm

These tanks fire small BB pellets and are NOT suitable for children under 17 years of age.

The ultimate radio controlled tank collection for every “wannabe” tank commander and they even fire BB pellets! Highly detailed with authentic colouring, these tanks feature a full function radio control unit to operate the left and right tracks, turret rotation, main gun elevation and the BB pellet firing mechanism.

BB pellets are supplied together with the tank battery and mains charger. Also available with lights and sound effects!

Features:

• 1/16th Scale
• 3 channel RC control
• Forward
• Reverse
• Turret Rotation
• Gun Barrel Elevation
• Automatic Electric Gun System
• Realistic Chassis
• Working Tracks
• Working Suspension

Effects Versions Feature:

• Realistic smoke
• Working lights
• Battle sounds including engine and machine gun fire

Specifications:

• Length - 530mm
• Width - 232mm
• Height - 188mm

These tanks fire small BB pellets and are NOT suitable for children under 17 years of age.

Contains:

• 30 x Igniters
• 6 x A8-3 engines
• 6 x B6-4 engines
• 6 x C6-5 engines
• 6 x C6-7 engines
• 1 x Recovery Wadding

The RC SYSTEM "Blue Whale” power boat has it all, stunning racing lines with the performance to match. Underneath the deck of this boat is a water cooled 540 motor coupled to an adjustable outboard drive system. Also under deck is the electronics, all safely housed in a water proof box... just in case. The boat is powered by a 7.2v racing pack, which is included along with the mains charger.

The Blue Whale is the boat to have so let’s go ride some waves!!

Features:

• Fully Assembled
• Pistol grip radio supplied
• All electronics supplied and fitted
• Water proof radio box
• Water cooled motor
• Outboard drive system
• 7.2v Battery & Charger supplied
• Crash resistant hull

Specifications:

• Length: 920mm
• Width: 255mm
• Motor: Water cooled 540

Thunder Tiger offers the SPARROWHAWK VX as an assembly kit. Features include four complete independent oil-filled shocks, aluminium drive shaft, stiffer shock springs, complete bearings in its drive train, steering and wheels and a new added front differential. This car is loaded with performance features and even better is a stock SUPER 17 motor for free.    

KEY FEATURES:

• Composite tub chassis w/countersunk battery tray
• 4WD shaft drive train system
• Full ball bearings
• Cast aluminium motor plate and mount
• Fully adjustable suspension
• Hardened steel gear differentials
• Carbon plastic suspension components
• Independent composite shocks
• Includes 540 17T Motor
• Includes Pre Painted body shell
• Requires Radio equipment, ESC, Battery, Charger

SPECIFICATIONS:

• Length: 368mm
• Width: 190.5mm
• Wheelbase: 263.5mm
• Kit Weight: 1100g Approx

Servo shown is NOT included in kit. The tires and wheels in your kit may vary from those shown in the picture

Thunder Tiger offers the SPARROWHAWK VX as an assembly kit. Features include four complete independent oil-filled shocks, aluminium drive shaft, stiffer shock springs, complete bearings in its drive train, steering and wheels and a new added front differential. This car is loaded with performance features and even better is a stock SUPER 17 motor for free.    

KEY FEATURES:

• Composite tub chassis w/countersunk battery tray
• 4WD shaft drive train system
• Full ball bearings
• Cast aluminium motor plate and mount
• Fully adjustable suspension
• Hardened steel gear differentials
• Carbon plastic suspension components
• Independent composite shocks
• Includes 540 17T Motor
• Includes Pre Painted body shell
• Requires Radio equipment, ESC, Battery, Charger

SPECIFICATIONS:

• Length: 368mm
• Width: 190.5mm
• Wheelbase: 263.5mm
• Kit Weight: 1100g Approx

Servo shown is NOT included in kit. The tires and wheels in your kit may vary from those shown in the picture

The Venom Bondi Surfer Girl is another addition to our summer range of fun products. Pre-build and ready to surf this hottie is able to surf up to 1/2m waves but is also cool in flat waters. Comes complete with a 2CH transmitter, 7.2v 1800mah NiCD battery, AC charger and display stand. Just add 8 AA batteries and water.

Motor Features:

• Water Cooled 540 Type Motor
• Servo Controlled Rudder
• Double Wing Rudder Steering

Specifications:

• Length: 660mm
• Height: 360mm
• Width: 160mm
• Weight w/o Battery: 481oz / 1365gm

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable – proven in over 50,000,000 launches!

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable – proven in over 50,000,000 launches!

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable -proven in over 50,000,000 launches!

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable -proven in over 50,000,000 launches!

These beautiful boats come with pre-painted fibreglass Hull, scale rigging, fishing gear and other details found only on Thunder Tiger scale boats.

First thing you will notice is the silky smooth fibreglass hull, with built in ASC (Anti Sinking Cabins) for even greater reliability in high seas. Every captain will be impressed in the fact that servos, and forward/backward 50A ESC. are all factory installed.

Features:

• Factory painted and pre-assembly scale fishing boat
• Fibreglass hull with anti-sinking cabins design
• Requires only a few minutes of assembly for of Mast and Rigging
• Scale detailing includes fishing gear, laser cut deck and wooden decorations
• Forward and backward 50 Amps ESC and standard servo are factory installed
• 4.5 Amps 6v Pb-Acid sealed battery and wall charger included

Specifications:

• Length: 600mm
• Beam: 220mm  
• Height: 530mm
• Motor: 550 included

Looking for something a little different, something not too big, but very quick and bags of fun?, then look no further than CEN's Mini Madness 2WD EP Monster Truck! Supplied pre-built, painted and decaled from the factory with its radio control included and pre-installed, the Mini Madness is truly ready to run, just as soon as you've charged its included 7.2v battery pack of course! Its tough ladder frame chassis is made from impact-resistant glass/nylon and is the platform onto which all other parts are bolted. The compact, sealed transmission features a gear differential to aid cornering and power is supplied by an included 540 size motor. No less than 8 shock absorbers are included for bump suppression – all connected to a double-wishbone suspension set-up. Mini Madness' radio control system features an electronic speed controller that allows pin-point speed control with extended running times. The transmitter includes both steering and throttle trims, with adjustable travel volume control on steering. ST style balloon tyres are supplied pre-glued to chromed nylon wheels to create an eye-catching look, especially when coupled to the multi-coloured polycarbonate body shell, supplied pre-stickered and mounted from the factory.

CHINA TEAM, as the first syndicate ever to carry the Chinese Flag in the history of the America’s Cup.  The boat of CHINA TEAM is called ‘Longtze’, which means son of the dragon. In the 32nd America’s Cup, the Chinese dragon which is the only Asian racing yacht participate in this competition and reconnect with their ancient and prestigious maritime tradition.

Specifications:

• Length: 993mm
• Beam: 172mm
• Mast Height: 306mm
• Overall Height: 1700mm
• Overall Weight: 7.7 lb.

Features:

• Quality Factory Pre-painted Fibreglass Hull
• High Performance Plus “Tear Resist” Racing Sails
• Light yet Rigid Extruded Aluminium Booms and Master
• Stabilized Low Drag Hydrodynamic Steel Ballast
• Black Anodized Aluminium Stand Included
• Officially Licensed by China Team

Never before has it been easier to try your hand at the exciting world of r/c electric boats. FastWave’s new budget, entry level CubShark provides everything you need to be out on the water in no time. Just add AA batteries to the transmitter and receiver box, charge the 7.2v battery and away you go.

This may be an entry level boat, but you will be churning up the water and watching the Cubshark’s sleek hull cut through the surface just like the real thing.

Features:

• 2-channel radio installed
• Separate 3kg servos and receiver units
• Radio box
• Water cooled 540 motor
• Quick release motor mount
• Lightweight ABS moulded hull design with hatch
• Wall charger and 7.2v battery included

Specifications:

• Length: 650mm
• Width: 200mm
• Height: 140mm
• Weight: 1270g (approx)

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable – proven in over 50,000,000 launches!

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable – proven in over 50,000,000 launches!

Safe design, precise manufacturing and strict engineering tolerances have made Estes model rocket engines the standard in the industry. Estes engines are safe and reliable – proven in over 50,000,000 launches!

Introducing a famous America’s Cup yacht, the ETNZ (Emirates Team of New Zealand) Nearly 20.000 man hours and over six months to build this yacht, the ETNZ is now ready to change the 2007 regatta. Thunder Tiger is authorized to replicate the ETNZ in a 1M model with fibreglass and the very latest finishing technologies to make this yacht just like the real thing.

Get equipped and experience the thrill of sailing America’s Cup yacht.

Features:

• Pre painted fibreglass hull
• "Tear resist" racing sails
• Aluminium booms and masts.
• Low drag steel ballast
• Stand included

Specifications:

• Length: 993mm
• Beam: 172mm
• Mast height: 1306mm
• Overall height: 1700mm
• Overall weight: 3.5kg

Flash by name, Flash by nature. Pound through the wake as your trail your buddy in an attempt to catch him coming into the next turn. High octane powerboat racing is just a battery charge away, The rest is up to you.

Specifications:

• Full-Function Digital Proportional
• Water cooled motor
• Length 525mm
• Width 150mm
• Height 130mm
• Scale 1:25
• 120m Range
• Changeable crystals
• 9.2v 600mah Ni-Cd battery included
• AC Charger included

The red bikes from Bologna are legendary. They have dominated Superbike racing for the decade. NOW YOU HAVE THE CHANCE TO EXPERIENCE THE SOPHISTICATION AND AERODYNAMICS OF THIS DREAM MACHINE. Its clean lines and sleek looks are extracted directly from the real motorcycle. 100% Pre-built by factory. Vivid factory-paint and cowling with decals finish DUCATI999R high impact lexan bodywork. Doubled aluminium spring loaded front forks and adjustable aluminium oil filled rear mono shock provides excellent responsiveness and handling just like the real machine. Machined aluminium rear swing arm are rigid, durable, and light. High grip racing slick tires are mounted on aluminium wheels. Aluminium side frames, which are strong and terminally rigid, make the DUCATI999R responsive, light and fast. Rear wheel chain drive ball bearing drive train and high performance motor create incredible power. Unique steering servo linkage has functioned for stable steering response. For detail, circular roll-over protection wire protects it from any scratch. Finally, the life-like rider completes the experience creating a visually exciting bike.

Features:

• 100% Factory assembled with all the electronic equipments
• Functional front and rear suspension
• Aluminium spring loaded front fork
• Aluminium rear swing arm
• Aluminium rear front and rear wheels
• Aluminium side frame
• Chain drive and with ball bearing drive-train
• High grip, racing sticker tire
• Unique steering servo linkage for stable steering response
• Circular, roll-over protection wire
• High impact collared and decaled body

Specifications:

• Length: 440mm
• Width: 180mm
• Height: 285mm
• Wheelbase: 295mm

Small Scale, Big Attitude !........

The HAMMER S18 features an extruded chassis and newly designed small reinforced metal diff gear to handle its powerful PRO-18 engine and helps to ensure that you can obtain the ultimate power and torque when its needed. Because of its unique size, the S18 will out accelerate most 1/8th big monster trucks and with its agile handling, you will enjoy this new way to drive.

Features:

• PRO 18 Engine
• Metal gear servo for throttle control
• Lightweight extruded aluminum chassis
• Newly desgined FR & RR bevel diffs.
• Metal geared 2 speed transmission
• Heavy duty universal CVA.
• Dual brake discs
• High grip tyres
• High impact FR & RR Bumpers
• Sealed RX/Battery box
• Pivot ball style suspension system
• Aluminum tuned pipe and manifold
• 8 oil filled long stroke shocks
• 125cc Fuel tank
• Fully ball raced

Specifications:

• Length : 437mm
• Width : 350mm
• Height : 220mm
• Wheelbase : 290mm
• Weight : 3570g
• Ground Clearence : 50mm
• Tire size : 135mm x 65mm

It’s hard hat time with Hobby Engine’s superb range of highly detailed construction r/c range. This scale models feature up to ten functions that can all be operated from the transmitter and that operate and work just like the real thing!

All models feature an authentic ‘weathered look’ for added scale realism.

Spec Check

• 9-Function
• Length 743mm
• Width 222mm
• Height 490mm
• Scale 1:12
• Forward, reverse, rotating cab, digging motion with moving arm, light, caterpillar tracks
• 9v battery for Transmitter included
• 7.2v 600mah Ni-Cd battery included
• AC Charger Included

It’s hard hat time with Hobby Engine’s superb range of highly detailed construction r/c range. This scale models feature up to ten functions that can all be operated from the transmitter and that operate and work just like the real thing!

All models feature an authentic ‘weathered look’ for added scale realism.

Spec:

• 10-Function
• Length 590mm
• Width 210mm
• Height 660mm
• Scale 1:6
• Lights, forward/reverse, rear turning action, realistic lift and tilt
• Extends to nearly 70cm
• Realistic pallet and drum included
• 9v battery for Transmitter included
• 7.2v 600mah Ni-Cd battery included
• AC Charger Included

Expanding the range of construction RC models, Hobby Engine have released the Infra Red controlled Tower Crane model. This scale model features 11 operating functions and has realistic blinking operating lights to make it work just like the real thing!

All models feature an authentic ‘weathered look’ for added scale realism.

Spec Check:

• 1/30th Scale
• 90 cm (35.5 inches) tall
• Range 3 meters
• Infra-red controller included
• 11 Operating Functions - inc 360 ° boom rotation, 3D movement
• 3 Realistic Sounds
• Detailed Finish

Hobby Engine have chosen the awesome 1/16th scale Leopard A25 as its second foray into RC tanks. The Leopard is the mainstay of the German Army and amongst the most advanced in its field, being the first to utilise a 120mm main gun. With additional scale realistic touches such as opening door and suspension, this radio control tank makes a great toy for anyone interested in RC or model entusiasts interested in military vehicles. Everything you need is in the box, radio, battery, charger and tank. Just charge and go!

Features

• Fully Functional
• Individual Suspension
• Includes bullet and cardboard target
• Fire bullets up to 1 meter
• Weathered finish
• Realistic shooting sound effect
• Rotating turret Left/Right
• Cannon Up/Down
• Scale: 1:16th

The M1 Abrams is the standard battle tank of the US Forces and is considered to be the best of its category. It has superior firepower, excellent protective armour and high speed even when passing through rough terrain. Sophisticated sensors and night vision instruments enable the tank to operate efficiently in any weather condition. Get ready to re-enact Desert Storm with these two highly detailed battle tanks from Hobby Engine. Replicated with superb detail, these full function tanks even fire shells. Let your imagination take over as you bear down on Bhagdad, Kuwait or the forests of war torn Bosnia.

M1 Tank Specs:

• Full-Function
• Length 685mm
• Width 230mm
• Height 220mm
• Firing range 3M
• Scale 1:16
• Climbs up to a 35° slope
• Forward, backward, turn left and turn right
• Turret rotates left and right
• Front and rear light
• Body rotates 360° freely
• Cannon moves up and down with machine gun sound
• Cannon shoots bomb shaped plastic bullet
• 9v battery for Transmitter included
• 7.2v Ni-Cd battery included
• AC Charger included

The M1 Abrams is the standard battle tank of the US Forces and is considered to be the best of its category. It has superior firepower, excellent protective armour and high speed even when passing through rough terrain. Sophisticated sensors and night vision instruments enable the tank to operate efficiently in any weather condition. Get ready to re-enact Desert Storm with these two highly detailed battle tanks from Hobby Engine. Replicated with superb detail, these full function tanks even fire shells. Let your imagination take over as you bear down on Bhagdad, Kuwait or the forests of war torn Bosnia.

M1 Tank Specs:

• Full-Function
• Length 685mm
• Width 230mm
• Height 220mm
• Firing range 3M
• Scale 1:16
• Climbs up to a 35° slope
• Forward, backward, turn left and turn right
• Turret rotates left and right
• Front and rear light
• Body rotates 360° freely
• Cannon moves up and down with machine gun sound
• Cannon shoots bomb shaped plastic bullet
• 9v battery for Transmitter included
• 7.2v Ni-Cd battery included
• AC Charger included

It’s hard hat time with Hobby Engine’s superb range of highly detailed construction r/c range. This scale models feature up to ten functions that can all be operated from the transmitter and that operate and work just like the real thing! All models feature an authentic ‘weathered look’ for added scale realism. Spec Check:

• 7-function
• Length 470mm
• Width 220mm
• Height 218mm
• Scale 1:24
• Forward, reverse, turning, dumping action, working lights
• Rocks and boulders included
• 9v battery for Transmitter included
• 4.8v 600mah Ni-Cd battery included
• AC Charger Included

This great Crane Truck from Hobby Engine is loads of fun for anyone interested in RC. It's working crane is perfect for lifting and it comes complete with realists scale cones and barriers to maintain a safe area while you are busy.

Features:

• Multi-Function
• Forward and backward with siren sounds
• Emergency lights and head lights
• Crane up and down
• Crane rotates
• Crane extends and retracts
• Left and right steering
• Outriggers
• Rear lights and hook
• 9v battery for Transmitter included
• 7.2v Ni-Cd battery included
• AC Charger included

Spec Check:

• Length 925mm
• Width 170mm
• Height 635mm
• Scale 1:18

It’s hard hat time with Hobby Engine’s superb range of highly detailed construction r/c range. This scale models feature up to ten functions that can all be operated from the transmitter and that operate and work just like the real thing!

All models feature an authentic ‘weathered look’ for added scale realism.

Spec Check:

• 10-Function
• Length 950mm
• Width 222mm
• Height 958mm
• Scale 1:12
• Forward, reverse, rotating cab, lower and raising crane arm and bucket, caterpillar tracks
• Rocks and boulders included
• 9v battery for Transmitter included
• 7.2v 600mah Ni-Cd battery included
• AC Charger Included

This realistic fire engine is packed full of fun features making it ideal for serious modellers or those just looking for fun.

Spec Check:

• Multi-Function
• Length 685mm
• Width 162mm
• Height 650mm
• Scale 1:18
• Forward and backward with siren sounds
• Emergency Lights and head lights
• Ladder up and down
• Ladder rotates
• Ladder Extends and retracts
• Left and right steering
• Outriggers
• Rear lights and hook
• Shoots water
• 9v battery for Transmitter included
• 7.2v Ni-Cd battery included
• AC Charger included

It’s hard hat time with Hobby Engine’s superb range of highly detailed construction r/c range. This scale models feature up to ten functions that can all be operated from the transmitter and that operate and work just like the real thing!

All models feature an authentic ‘weathered look’ for added scale realism.

Spec Check:

• 8-function
• Length 550mm
• Width 220mm
• Height 295mm
• Scale 1:14
• Moving articulating arm, lights, up/down, left/right, turning
• 9v battery for Transmitter included
• 4.8v 600mah Ni-Cd battery included
• AC Charger Included

Hurricane 200 (including BL Motor & ESC)

The Venom Killer VeeTM RC speed boat is fully assembled and ready to run. It is powered by twin motors and comes complete with a 2CH Transmitter, 7.2v 1800mah NiCD battery, AC charger and display stand. This boat is suitable for children of 8 years and older and ideal for racing on flat water. The Killer VeeTM is extremely tough, durable and fully sealed. Just add 8 AA batteries and water.

Motor Features:

• Twin 380 Type Motors
• Differential Power Steering
• Adjustable Click Rudder

Specifications:

• Length: 608mm
• Height: 125mm
• Width: 230mm
• Weight w/o Battery: 112.8oz / 816g

The Volvo Ocean Race (formerly the Round the World Race) is an international yacht race around the world, held evey four years. It is legendary amongst sailing fans and takes in all the major oceans of the world.

The Killer Whales scale Volvo Open class model captures all the details of the exciting world of full size racing yachts.

Specifications:

• Length: 960mm
• Height: 1550mm
• Fibreglass hull
• 2-channel radio and rudder and winch servo included 
• 1.7m high sail
• Winch servo control
• Adjustable side stabalizers

Please note: This model comes with all parts supplied but requires at least 6 hours build time. Therefore we only recommend this yacht for the serious modeller.

Venom’s new electric King of Shaves, Class 1, 34 inch scale racing catamaran, officially licensed by King of Shaves® and accurately replicates the 2006-2007 King of Shaves® Class 1 Powerboat. The Venom electric C1 racing boat King of Shaves has many high performance features, including a scale fiberglass composite catamaran hull combined with twin Venom 60A Pro Marine brushless speed controls and dual Venom V380 Marine motors turning 2880KV each. This powerful combination turns twin glass filled nylon counter rotating propellers through CNC machined fully adjustable Arneson style drives to rocket the King to speeds in excess of 40mph!

King of Shaves Features:

• Fiberglass Composite Hull with scale King of Shaves graphics
• Secured top hatch with pin and Neodymium magnets
• Two water cooled Venom 60A Pro Marine Brushless Speed Controls
• Two water cooled Venom V380 2880KV Brushless Motors with 4mm shafts
• Two Arneson style CNC machined aluminum fully adjustable drives with ball bearings
• CNC machined aluminum motor mounts
• Aluminum ESC and servo mounts
• Composite nylon counter rotating propellers
• Laser cut and sealed plywood battery tray with integrated receiver mount
• VR3T Digital FM transmitter and receiver
• Laser cut and sealed plywood boat stand

Specifications:

• Length: 34" (86.4cm)
• Beam: 9.5" (24cm)
• Height: 4.5" (11.4cm)
• Overall Height: 6.5" (16.5cm)
• Weight: 4.5 lb (2.04 kg)
• Chassis: Hand-Laid Fiber Glass
• Motor or Engine: Brushless, Electric Direct Drive
• Radio: Venom VR3T 3-Ch FM Radio Transmitter
• Servos: (1) Metal Gear High Torque (VEN-1825)

Requires batteries for completion.

The Venom King of Shaves® Class 1 Racing Ready to Run (RTR) Gas Boat is officially licensed by King of Shaves and accurately replicates the 2006-2007 King of Shaves® Class 1 Powerboat. This gas powered RC boat is modeled after the world class champion boat that won the 2007 Powerboat P1 World Title piloted by James Sheppard and Craig Wilson.

The P1 powerboats are known for being some of the most powerful in the world, achieving amazing speeds in varying weather conditions and piloted by some of the most exciting speed enthusiasts in the world. In fact, the Evolution class of P1 powerboats can reach speeds in excess of 150 mph and need to be controlled by two people – one for steering and one for throttle because they are so powerful. As the sport grows in popularity, so does the RC gas power boat industry – so how could Venom resist creating a model for enthusiasts worldwide?

At almost 5 feet in length (Length - 58in/1470mm Beam - 15in/380mm), the Venom King of Shaves® Class 1 Racing RTR Gas Boat features a 2+ Horse Power Water-Cooled 26cc Marine Engine that will rocket your boat to 35+ MPH/ 56+ KPH right out of the box! This boat looks great and its maneuverability, speed and sheer size is sure to draw all kinds of attention. You will truly own the lake.

With the included 3-Channel Programmable FM Radio with High Torque Servo's, Machined Aluminum Running Gear with Adjustable Drive Line, Hand-Laid Fiberglass Hull, Pre-Balanced Aluminum Propeller, a Sealed Acrylic Radio Box and a Laser Engraved padded wooden display stand, you'll have a top of the line Ready-to-Run Gas Boat at an amazing price!

Venom has an excellent reputation for taking incredible engineering and miniaturizing it for the RC vehicle world and the King of Shaves® RC Gas Boat is a perfect example of this fanatical attention to detail and painstaking design and testing process. If you are looking for a slick, powerful and beautifully made RC gas boat, look no further than the Venom King of Shaves Class 1 Racing Ready to Run (RTR) Gas Boat

King of Shaves Features

• 2+ HP Water Cooled 26cc Marine Engine
• 3 Ch programmable FM radio with high torque servo’s
• Machined aluminum running gear with adjustable drive line
• Hand-laid fiberglass hull
• Pre-balanced aluminum propeller
• Sealed acrylic radio box

Specifications:

• Length: 58 Inches
• Beam: 15in / 380mm
• Height: 9in / 230mm
• Overall Height: 13in / 330mm
• Weight: 16 lbs
• Fuel Capacity: 24oz
• Run Time: 30 minutes
• Sound Level: 84db
• Speed: 35+ Mph / 56+ KPH Out of the Box

You will need 12 AA Alkaline Batteries. (8 for the RC Transmitter, 4 for Receiver)

These beautiful boats come with pre-painted fibreglass Hull, scale rigging, fishing gear and other details found only on Thunder Tiger scale boats.

First thing you will notice is the silky smooth fibreglass hull, with built in ASC (Anti Sinking Cabins) for even greater reliability in high seas. Every captain will be impressed in the fact that servos, and forward/backward 50A ESC. are all factory installed.

Features:

• Factory painted and pre-assembly scale fishing boat
• Fibreglass hull with anti-sinking cabins design
• Requires only a few minutes of assembly for of Mast and Rigging
• Scale detailing includes fishing gear, laser cut deck and wooden decorations
• Forward and backward 50 Amps ESC and standard servo are factory installed
• 4.5 Amps 6v Pb-Acid sealed battery and wall charger included

Specifications:

• Length: 550mm
• Beam: 205mm  
• Height: 470mm
• Motor: 550 included

This fun and easy to build rocket launches on mini-engines then tumbles back to earth.

Recommended Motors: 1/4A3-3T, 1/2A3-4T, A3-4T, A10-3T

Specification

• Length: 114mm
• Weight: 2.7g
• Rocket Motor: 1/4A3-3T, 1/2A3-4T, A3-4T
• Altitude: 229m
• Recovery Parachute: Featherweight tumble
• Diameter: 13.7mm

What a beauty! This is the one you've been dreaming about! It's got the full package. Sleek, yet full body design, a payload section, laser cut fins and waterslide decals. This rocket launches on two Estes D size model rocket motors and is recovered by a large 610mm parachute.

Recommended Motors: 2x D12-3, 2x D12-5, 2x D12-7 (Do not mix sizes)

Specification

• Length: 914mm
• Weight: 162g
• Altitude: 244m
• Recovery Parachute: 610mm
• Diameter: 56.3mm

The very first Estes E2X rocket! One piece fin unit for easy construction. Millions have started with this classic design.

Recommended Motors: 1/2A6-2, A8-3, A8-5, B4-4, B6-4, B6-6, C6-5, C6-7

Specification

• Length: 311mm
• Weight: 34g
• Altitude: 335m
• Recovery Parachute: 305mm
• Diameter: 24.8mm

After three decades, the Alpha is still one of the most popular beginner's models. It's a reliable performer that can use a variety of motors.

Recommended Motors: 1/2A6-2, A8-3, A8-5, B4-4, B6-4, B6-6, C6-5, C6-7

Specification

• Length: 312mm
• Weight: 23g
• Altitude: 305m
• Recovery Parachute: 305mm
• Diameter: 24.9mm

A miniature version of the best selling Big Bertha, this rocket soars to 175m!

Recommended Motors: A8-3, B4-4, B6-4, C6-5

Specification

• Length: 324mm
• Weight: 45.3
• Altitude: 175m
• Recovery Parachute: 305mm
• Diameter: 41.6mm

The high flying Bandito can be assembled in under an hour. Includes pre-coloured, slotted body tube and plastic parts and requires mini-engines.

Recommended Motors:1/4A3-3T, 1/2A3-2T, A3-4T, A10-3T

Specification

• Length: 284mm
• Weight: 17g
• Altitude: 183m
• Recovery Parachute: 305mm
• Diameter: 18.7mm

Burly, big and beautiful! This is the first big rocket for many modellers. Slow, realistic lift-offs are what Big Bertha does best! An absolute classic from Estes, it's been a Beta Series best-seller for decades.

Recommended Motors: B4-2, B4-4, B6-2, B6-4, C6-5

Specification

• Length: 610mm
• Weight: 62g
• Altitude: 152m
• Recovery Parachute: 457mm
• Diameter: 41.7mm

The Blue Ninja is the biggest rocket in the E2X class. It is 795mm tall and is powered by a 'D' motor.

Requires 5mm Maxi Launch Rod (D-ES2244) – sold separately. Recommended Motors: C11-3, D12-3

Specification

• Length: 795mm
• Weight: 145.4g
• Altitude: 238m
• Recovery Parachute: 457mm
• Diameter: 41.6mm

High flying 2 stage rocket powered by 'D' motors. It soars to over 540m! Requires 5mm Maxi Launch Rod (D-ES2244) – sold separately.

Recommended Motors: Single stage – D12-5 Two stage (Booster) – D12-0 (Upper) – D12-7

Specification

• Length: 721mm
• Weight: 75.3g
• Altitude: 546m
• Recovery Parachute: 457mm
• Diameter: 33.7mm

Catch some attention! The Chrome Domes rocket features spectacular gold coloured chrome plating to the moulded fins and nose cone. The body tube comes in a variety of prismatic colours too. Assembles in minutes and flies to over 180m before its parachute recovery.

Recommended Motors: A8-3, B4-4, B6-4, C6-5

Specification

• Length: 457mm
• Weight: 75g
• Altitude: 183m
• Recovery Parachute: 305mm
• Diameter: 24.3mm

A 'D' motor powered booster stage rocket that roars to ultra-high altitudes – over 800m! Requires 5mm Maxi Launch Rod (D-ES2244) – sold separately.

Recommended Motors:
Single stage – A8-3, B4-4, B6-4, C6-5
Three stage (Booster) – D12-0
Three stage (Second) – C6-0
Three stage (Upper) – B6-6, C6-7

Specification

• Length: 1041mm
• Weight: 59g
• Altitude: 811m
• Recovery Parachute: None – (Tumble, 2 x Streamers)
• Diameter: 24.9mm